The LOS-CIR Series ceiling-mount passive infrared sensors can integrate into Lutron systems or function as standalone controls using a Lutron power pack. The sensor uses a small semiconductor heat detector that resides behind a multi-zone optical lens. The sensors detector is sensitive to the heat emitted by the human body. In order to trigger the sensor the source of heat must move from one range of detection to another. Non-moving hot objects will not cause the lights to turn on.

The LOS-CIR Series ceiling-mount occupant sensors provides reliable detection with high error immunity. The internal microprocessor analyzes the information from the PIR technology and determines the optimum setting to use in order to properly cover the space.

• -Timer Adjustment Automatic mode: Continually adapting sensor automatically adjusts settings to the space
• - Manual mode: 8 to 32 minutes
• - Test mode: 8 seconds
• - LED Lamp Red: infrared motion detected
• - Housing Rugged, high-impact, injection-molded plastic
• - Color-coded leads 6 (16.24cm)
• - Power Operating voltage: 20-24 V , Class 2 (PELV) low-voltage
• - Operating current: 33 mA nominal
• - Control output: 20-24 V active high logic control signal with short-circuit protection, open collector when unoccupied
• - Certifications UL and CUL listed
• - Operating Environment Temperature: 32°F to 104°F (0°C to 40°C)
• - Relative humidity: less than 95%, non-condensing
• - For indoor use only