 |
 |
 |
|
The PW-100 passive infrared (PIR) wall switch sensor turns lights ON and OFF based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and variety of features.
- • PW-100: 120/230/277 VAC; 50/60 Hz
- @ 120 VAC, 0-800 W ballast or tungsten,1/6 hp
- @ 230/277 VAC, 0-1200 W ballast
- • PW-100-347: 347 VAC; 50/60Hz, 0-1500 W
- ballast
- • Time delays: SmartSet (automatic), fixed (5, 10,
- 15, 20, 25 or 30 minutes), walk-through, testmode
- • Coverage: Major motion 35’x 30’
- Minor motion 20’ x 15’
- • Sensitivity adjustment: PIR (high/low)
- • Dimensions: 2.73" x 1.76" x 1.83"
- (69.3mm x 44.7mm x 46.5mm) L x W x D
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- • Detection Signature Processing eliminates false
- triggers and provides immunity to RFI and EMI
- • Zero-crossing for long relay life
- • Vandal resistant lens combines precise coverage
- with durability
- • Choice of Auto-ON or Manual-ON operation
- • Selectable SmartSet automatically adjusts time
- delay for maximum savings
- • Selectable walk-through mode turns lights off
- three minutes after the room is initially occupied
- if no motion is detected after the first 30
- seconds
- • Selectable test mode allows quick and easy
- adjustments
- • Selectable audible and/or visual alerts for
- impending shutoff
- • In automatic mode, sensor returns automatically
- to Auto-ON after lights are turned off
- manually; ideal for presentations
- • LED indicates occupancy detection
- • Features built-in light level sensing with simple,
- one-step setup
- • Override mode allows sensor to operate as a
- service switch in the unlikely event of a failure
- • NEMA WD 7 guideline utilized for coverage
- testing
|
|
|
|
|
|
|
|
|
